Spinner II · Authorized Distributor
A bypass oil-cleaning centrifuge that removes the fine soot and sludge full-flow filters miss, so your oil stays usable longer.
The Product
Your full-flow filter catches the larger particles. It isn't built to stop the fine soot, sludge and wear metal that build up in the oil over time and drive long-term engine wear.
A Spinner runs alongside it on a small bypass loop. Oil pressure spins a rotor at high speed, and centrifugal force pulls those fine particles out of the oil. Contaminants pack into the rotor, which you clean or replace at service. Clean oil returns to the sump.
How It Works
A small bypass flow is diverted from the engine's lube system.
Oil pressure drives the rotor at high speed.
Centrifugal force packs heavier particles against the rotor wall.
Cleaned oil drains back to the sump, continuously, while the engine runs.
Hover or tap a step to see it in the system.
Models
Additional models available, including the 3400, 560HE and 576HE. Model selection is based on engine size and oil capacity. We'll size it for you.
Applications

Buses, refuse trucks and service fleets that run long hours and stop often.
Learn more →
Class 8 tractors and vocational trucks where every oil change is shop time.
Learn more →
Propulsion and auxiliary diesels with large sumps and long runs between ports.
Learn more →
Prime and standby gensets that need to start clean and run when called.
Learn more →
Loaders, haul trucks and crushers working in dust, heat and heavy load.
Learn more →
Stationary diesels, compressors and pumps running steady duty cycles.
Learn more →Oil-Cost Calculator
Enter your fleet's figures. Every result below is an estimate based on what you enter.
Estimated annual savings
$0At these settings, a Spinner may not pay off. A cost review can check your actual oil condition.
FAQ
Installation is simple and comes with engineering diagrams. Minimal operator training is required, on-site support is available, and Spinner II provides ongoing service and technical support.
Contaminants collect in a removable rotor. On cleanable models you clean the rotor and put it back; on the disposable 596 HE you replace it. How often depends on the engine, duty cycle and how much the rotor collects, so we set the interval with you based on oil analysis.
No. It works alongside your full-flow filter. The filter keeps protecting the main lube circuit; the Spinner cleans a bypass stream of the fine particles the filter passes.
It depends on engine size and sump capacity. Send us your engine make, model and oil capacity through the cost review form below and we'll size it for you.
Application Sheet
A two-page overview to keep or share with your team: models, how it works, field installations, and what to send us for a cost review.
Cost Review
Tell us about your engines and current oil service. We'll show you what a Spinner would realistically save before you commit to anything.