Spinner II · Authorized Distributor

Cleaner Oil. Longer Intervals.

A bypass oil-cleaning centrifuge that removes the fine soot and sludge full-flow filters miss, so your oil stays usable longer.

A Second Line of Defense for Your Oil

Your full-flow filter catches the larger particles. It isn't built to stop the fine soot, sludge and wear metal that build up in the oil over time and drive long-term engine wear.

A Spinner runs alongside it on a small bypass loop. Oil pressure spins a rotor at high speed, and centrifugal force pulls those fine particles out of the oil. Contaminants pack into the rotor, which you clean or replace at service. Clean oil returns to the sump.

Spinner II oil-cleaning centrifuge product family
The Spinner II Lineup

Four Steps, Running Continuously

  1. Oil Enters

    A small bypass flow is diverted from the engine's lube system.

  2. Rotor Spins

    Oil pressure drives the rotor at high speed.

  3. Contaminants Separate

    Centrifugal force packs heavier particles against the rotor wall.

  4. Clean Oil Returns

    Cleaned oil drains back to the sump, continuously, while the engine runs.

Spinner II bypass oil flow Oil leaves the engine through a bypass line, passes through the Spinner centrifuge where contaminants are separated in the rotor, and returns clean to the engine sump. The full-flow filter keeps working on the main lube circuit. ENGINE FULL-FLOW FILTER STAYS IN PLACE SUMP SPINNER II BYPASS FLOW 1 2 ROTOR SPINS 3 SOOT PACKS ON ROTOR WALL CLEAN OIL RETURN 4

Hover or tap a step to see it in the system.

Sized to the Engine

Additional models available, including the 3400, 560HE and 576HE. Model selection is based on engine size and oil capacity. We'll size it for you.

Packed soot and sludge removed from a Spinner II rotor
Contamination collection. Soot and sludge pulled from the oil, packed solid in the rotor.
Model 3600 rotor packed with contaminants at service
Model 3600 rotor at service. You would need several filters to hold the same capacity.

Built for Diesel, Wherever It Runs

Run Your Own Numbers

Enter your fleet's figures. Every result below is an estimate based on what you enter.

Filters, shop time and supplies for one oil change.
1.5×
How much longer you expect to run between oil changes. 1.5× means a 10,000-mile interval becomes 15,000.
Advanced
Lost revenue or rental cost while the unit is out of service.
Cleaning labor or replacement rotors, per engine per year.

Estimated annual savings

$0
Current annual oil-service cost
$0
Estimated annual cost with Spinner
$0
Oil changes avoided per year (fleet)
0
Estimated payback
Enter installed price to see payback

Send These Numbers for a Cost Review

Common Questions

How is it installed?

Installation is simple and comes with engineering diagrams. Minimal operator training is required, on-site support is available, and Spinner II provides ongoing service and technical support.

How often does it need service?

Contaminants collect in a removable rotor. On cleanable models you clean the rotor and put it back; on the disposable 596 HE you replace it. How often depends on the engine, duty cycle and how much the rotor collects, so we set the interval with you based on oil analysis.

Does it replace my oil filter?

No. It works alongside your full-flow filter. The filter keeps protecting the main lube circuit; the Spinner cleans a bypass stream of the fine particles the filter passes.

Which model do I need?

It depends on engine size and sump capacity. Send us your engine make, model and oil capacity through the cost review form below and we'll size it for you.

First page of the Spinner II application sheet

Take the Details With You

A two-page overview to keep or share with your team: models, how it works, field installations, and what to send us for a cost review.

Download PDF PDF · 2 pages · 700 KB

Get a Verified Cost Review

Tell us about your engines and current oil service. We'll show you what a Spinner would realistically save before you commit to anything.